Grundfos Alldos offers a comprehensive range of accessories covering every requirement for dosing with Grundfos Alldos dosing pumps.

Accessories

•    Installation kits
•    Tubing
•    Pump connections
•    Foot valves
•    Suction lines
•    Injection valves
•    Pressure-relief valves
•    Pressure-loading valves
•    Multi-function valves
•    Pulsation dampers
•    Tanks
•    Wall brackets
•    Agitators and mixers
•    Automatic venting valves
•    Diaphragm leakage sensors
•    Dosing monitors
•    Water meters
•    Cables and plugs

Grundfos offers a wide range of dosing pumps representing state-of-the-art technology.
Digital Dosing solutions (SMART Digital, DME, DDI) set new standards in liquid chemical handling and accuracy. The operator can easily install and set up the pump to discharge exactly the quantity of dosing liquid required for the process in a unique drive- and flow-control management concept. The setting of the pump is displayed in ml/h, l/h or gph, and the operation mode is easily identified by means of icons.
The DMH mechanical hydraulic dosing pump range is the preferred choice for industrial and complex tasks. The DMH range is a series of extremely strong, robust pumps for applications where a substantial dosing range and high-pressure capabilities are required.

The Grundfos DMX range has proven its worth in dosing applications worldwide. With their robust diaphragm-based design and their high-quality motors DMX pumps require minimum maintenance and are best choice for many dosing applications. The DMX range is highly versatile: it covers a wide flow range and offers a variety of dosing head sizes, materials and accessories.

Accurate dosing – all the time

The diaphragm design ensures that the dosing flow variation is below ± 1.5 % and the linearity deviation is kept below 4 % at all times. This allows very precise dosing of your chemicals – as much as necessary, as little as possible.

Smooth and low-pulsation dosing

The DMX series combines sophisticated drive technolo¬gy and gear kinematics to ensure smooth and low-pulsation dosing without pressure peaks. This means less stress to all system components, such as tubes and valves, and leads to longer service intervals for the entire system.

Motors to match application needs

For applications with specific motor requirements, the versatile DMX range offers high-quality motors for 50 Hz, 60 Hz, 100 Hz (with Variable Frequency Drive VFD), as well as EX classified or ATEX-certified motors, if required.

Perfect material selection – for housing and liquid-wetted parts

The smaller DMX models have plastic housings offering chemical resistance and all the protec-tion necessary for many applications. The larger models have a robust cast-aluminium housing with epoxy coating to meet all application needs. Investment costs and running costs for spare parts are kept low over the years: A wide choice of materials for dosing head, valves and accessories allow selecting exactly the degree of chemical resistance required. All liquid-wetted parts need to be resistant to the chemicals used. The diaphragm is made of NBR and PTFE-coated.

Compact design – saves money and space

DMX pumps are available in 12 different dosing head sizes. Careful design work has kept them all very compact. This saves material costs and allows placing several pumps right next to each other in confined spaces. Double-head versions (DMX models 226 and 227) offer a very cost-efficient way to save space or to dose two different chemicals. The extra capacity offered by double-head versions can also be used to gain higher flow rates for a single chemical.

Accessories ensure perfect operation of the entire system

A wide range of accessories specially designed for the DMX series help optimise performance: AR control electronics (contact signal control with multiplier and divisor function, 4-20 mA control or stroke frequency control via display and key pad, low-level/empty signal), integrated relief valve, dosing controller, diaphragm leakage detection, servomotor for automatic stroke length adjustment, PTC motors with Variable Frequency Drive (VFD). We also offer system components such as pressure loading valves and pulsation dampers.

Applications

Disinfection, coagulation, flocculation, precipitation, etc. in:
•    Drinking water treatment
•    Waste water treatment
•    Pulp and paper industry
•    Textile industry
•    Cleaning water treatment
•    Food & Beverage industry, dairies
•    Cooling tower water treatment
•    Low-pressure boiler feed water treatment

DTS dosing tank stations are intended for storing and dosing liquids. Many different configurations can be selected flexibly to fulfil various dosing tasks. Due to the use of high-quality materials, DTS dosing tank stations can be employed for diverse dosing liquids. The selection of materials can be adapted via the configuration to match application and the selected dosing pump.
As they are easy to install, DTS dosing tank stations in combination with the digital dosing pumps DDA, DDC, DDE and DDI are the first choice in the matter of economic efficiency when adding liquids such as coagulants, disinfectants or neutralizing agents to a process in a precise and controlled way.

Components

•    Chemically resistant tank made of UV-stabilised, semitransparent or black polyethylene, in 6 sizes from 60 to 1000 litres, with embossed litre scale and PE screw cover
•    PE collecting tray
•    Handheld mixer or electric stirrer with level switch for dry-running protection
•    Rigid suction lance or foot valve made of PE, with 2-step level switch for dry-running protection and suction line to the dosing pump
•    PVC or PP injection unit with G 1/2 process connection
•    PE or PVC discharge line (10 m)
•    Drain valve
•    Filling armature with ball valve or dissolving hopper
•    Multi-function valve
•    Prepared for the installation of a dosing pump DDA, DDC, DDE, DMX 221 or DDI 60-10 including necessary assembly material like connectors, click-plate and screws depending on pump type